John Deere JD 410 BACKHOE LOADER Service Manual
John Deere JD 410. Do not operate backhoe controls unless you are in operator’s seat facing backhoe. Backhoe boom cylinder may be accidentally bumped, causing backhoe boom to move suddenly. When operating loader backhoe, make sure that all personnel are cleared from vehicle and work area. Failure to observe this precaution could cause injury to personnel.

John Deere Service Manual. Some parts are heavy. Be careful when handling them. Lifting equipment is needed when parts weigh over 50 pounds (23 kg) for a single person lift, over 100 pounds (45 kg) for a two person lift, and over 150 pounds (68 kg) for a three or more person lift. Do not try to handle heavy parts without lifting equipment. Keep clear of heavy parts supported only by lifting equipment. Failure to observe this precaution could cause serious injury or death of personnel.
John Deere JD 410 BACKHOE LOADER. Compressed air used for blowing away chips, dirt, etc., must leave nozzle at less than 30 psi (207 kPa) to prevent personal injury. Be certain that nozzle is rated to provide a maximum of 30 psi (207 kPa). Be sure to wear safety goggles or lenses when using compressed air. Compressed air and particles moved by compressed air can cause damage to your eyes.
Related Manual
John Deere Service manuals
John Deere Sidehill 6620 Hydraulic System Test
John Deere Valve Adjustment Service Manual
John Deere Tractor 100 series Operators Manual